Sterling Silver Lab Grown Blue Sapphire and 1 1/5 Cttw Diamond Sunburst Pendant Necklace

Highlights

• A lab-created blue sapphire, 8 mm, sits in a bezel setting at the center of the sunburst design.
• 24 baguette diamonds totaling 1 1/5 cttw surround the center stone in prong settings.
• Diamonds are natural, untreated, with H-I color and SI1-SI2 clarity.
• The mounting is rhodium plated .925 sterling silver.
• An 18 inch cable chain closes with a spring ring clasp.

Good to Know

• The bezel-set lab-created sapphire is protected at its edge, while the prong-set diamonds stay open to light from the sides.
• Total diamond weight of 1 1/5 cttw is spread across 24 baguette stones set around the center sapphire.
• The 18 inch cable chain and spring ring clasp keep the design simple to put on.
• The rhodium plating sits over a sterling silver base, so it is not solid precious metal throughout.
• Plating can wear thin over time and may eventually need re
• plating by a jeweler.

Frequently Asked Questions

What is the center stone in the pendant made of?

The center stone in the pendant is a lab-created blue sapphire, 8 mm in size and heat treated, set in a bezel setting.

What metal is the pendant made from?

The pendant is crafted in rhodium plated .925 sterling silver, which gives it a bright white finish over the sterling base.

How long is the chain on this necklace?

The pendant comes on an 18 inch cable chain that closes with a spring ring clasp.

How much care does the sterling silver in this piece need?

Sterling silver darkens over time in air, so a soft cloth pass now and then restores the brightness; store the piece dry and closed, and keep it away from chlorine and perfume.

How to Care for Your Sterling Silver Lab Grown Blue Sapphire and 1 1/5 Cttw Diamond Sunburst Pendant Necklace

1. Wipe the piece with a soft cloth after wearing to keep the sterling silver bright.
2. Keep it away from chlorine and perfume to slow tarnishing.
3. Store it dry and closed when not in use.
4. Avoid polishing compounds or dips, which can thin the rhodium plating.
5. Clean the diamonds gently with a soft cloth to maintain their polish.