Alternating Cubic Zirconia Eternity Band

Highlights

• The alternating eternity design creates a repeating baguette-cut cubic zirconia motif.
• A bright white, reflective finish gives the band a defined metal presence.

Good to Know

• Cubic zirconia is laboratory-grown and cut with facet proportions used for fine gemstones, returning light in the same way.
• The channel setting has no prongs to catch on clothing.
• The finish on rhodium plated over lead free alloy (brass) is a surface layer that can wear through over years on rings that rub daily.
• Polishing compounds and dips can thin the plating.

Frequently Asked Questions

What metal is the ring made from?

The ring is rhodium plated over lead free alloy (brass). The base-metal alloy provides the piece’s shape and weight, while the plating forms its surface. This finish gives the ring a bright white, reflective appearance and shields the underlying alloy from wear.

What do the listed stone measurements describe?

The 3 Mm X 2 Mm measurement applies to one genuine cubic zirconia accent stone, rather than the complete band. The ring’s 2.6 ct figure is the total stone weight across its stones. Each stone is baguette cut and held in a channel setting.

How to Care for Your Alternating Cubic Zirconia Eternity Band

1. Clean the piece with soap, water, and a soft cloth.
2. Avoid polishing compounds and dips, which can thin the surface layer on rhodium plated over lead free alloy (brass).
3. Ask a jeweller about re-plating if wear eventually exposes the base metal.