4 Ct Three Stone Rhodium Ring with Mystic and Clear CZ

Highlights

• Prong settings leave much of each round cubic zirconia open to light.
• A classic cocktail look for dressier occasions.

Good to Know

• Cubic zirconia is laboratory-grown and cut to the facet proportions used for fine gemstones.
• Prong settings allow light to reach the stones from the sides.
• The rhodium plated over lead free alloy (brass) surface can wear through over years of wear, and a jeweller can re-plate it.
• Polishing compounds and dips can thin the rhodium plated over lead free alloy (brass) surface.

Frequently Asked Questions

What is the ring made from?

The ring is rhodium plated over lead free alloy (brass). Rhodium forms a bright white, reflective surface finish, while the alloy underneath gives the piece its shape and weight.

What does the listed stone size refer to?

The listed stone size, 8mm X 6mm X 1.15mm, describes the cubic zirconia measurement rather than the ring size. Ring size options are Size 10, Size 5, Size 6, Size 7, Size 8, and Size 9. These are separate from the stone measurement.

How are the stones held in place?

Round cubic zirconia is held in prong settings. A prong setting grips a stone at a few points, leaving the remainder open so light can reach it from the sides rather than enclosing it in a closed setting.

How to Care for Your 4 Ct Three Stone Rhodium Ring with Mystic and Clear CZ

1. Clean the ring, which is rhodium plated over lead free alloy (brass), with soap, water, and a soft cloth.
2. Avoid polishing compounds or dips because they can thin the rhodium layer.
3. Ask a jeweller to re-plate the piece if the plating wears through over years of wear.